Change the monitor in the pull down menu and fill the empty fields with the following numbers 2560, 1440 and 40. You will be presented with another window that prompts you to enter “width”, “height” and “refresh rate” values.Click on the “display” tab followed by “custom resolutions”, a warning sign will pop up.Make sure you’re running in the “Advanced Mode”.Upgrade your Intel video driver to the latest version (v9.) and open the Intel Graphics and Media control panel.How to run a WQHD monitor at 2,560 x 1,440 via HDMI on an Intel HD3000, HD4000 Note that the trick should also work on an Intel HD4000 and, in theory, with an Intel HD2500 GPU as well.So below are the four steps we took to get the WQHD monitor to run on a HDMI port (we’re assuming that your monitor does have a HDMI port to start with). Two monitors running at 2,560 x 1,440 pixels. Just press apply followed by OK, and your screen will flicker for a few seconds before hopefully moving to the higher resolution.Īnd voilà! Job done.Since you’ve added a new value via the Intel GM control panel, it should, in theory, appear in the “resolution” sliding menu. After that, restart your computer, bring up the “screen resolution” menu, select the appropriate menu and change the resolution to the maximum permissible.Press on apply and then ok to validate your choice. So the key is to run the monitor at a low refresh rate, which shouldn’t be an issue if you don’t plan to do any gaming and stick to office tasks.

a number bigger than 40) will bring up a message informing you that you’ve exceeded the maximum bandwidth. That translates into a data transfer rate of 4.72Gbps a higher refresh rate (i.e.

So below are the four steps we took to get the WQHD monitor to run on a HDMI port (we’re assuming that your monitor does have a HDMI port to start with).

Digimate monitor drivers